Wireless Sensors & Data Loggers for the Industrial IoT
These wireless sensors are part of the Leap Sensors® wireless remote industrial monitoring system. It is THE system designed from the ground up to meet the specific, challenging needs of industrial & commercial users. Get better process control, failure prevention, safety improvement, automated auditing. Make the leap to the Industrial IoT – talk to an expert today.
- Long-life battery (up to 7 years, depending on application).
- Monitor temperature and more – vibration, amp, humidity, etc.
- Multiple sensors per transceiver node keep cost down.
- Easy to install in 5 minutes or less. Receive alerts via cellphone, laptop, or other mobile device.
Learn more about the Leap Sensors system.
-
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This version transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option. The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This breakthrough temperature transmitter enables cellular transmission from the highly adaptable Leap Sensors® system. The sensor transceiver node transmits directly via cellular service to the software - no gateway required. Ideal for remote locations with no internet access or for installations without power for a gateway.- Integrates almost any off-the-shelf temperature sensor: PRT, thermocouple, probe, and more.
- Can also integrate a humidity sensor for remote building monitoring.
- Powered by two tethered D-cell batteries - no external power source needed.
- Option for an external voltage source.
- Available with a standard wireless transmitter to pass data to a standard Leap Sensors gateway for locations within closer proximity.
-
This optional current transformer can be connected to the wireless Motor Monitor Transceiver Node to detect a rise in current that in indicative of a failing machine. Designed specifically for use in a machine condition based monitoring system as part of a condition based maintenance program. Part of the breakthrough Leap Sensors® system for the IIoT. Price is for a 0-50A AC split core current transformer. Let us know if you need a current transformer with a higher rating. Build your quote here: -
Reduce manufacturing downtime and gain real-time visibility into production performance with this wireless machine downtime monitoring system. This groundbreaking sensor delivers accurate machine downtime tracking, uptime measurement, and automated alerts to help teams respond faster, improve equipment utilization, and drive measurable downtime reduction.- Also monitors seven manufacturing KPIs, including: machine utilization, current state (up or down), downtime events, OEE, stop counts, total downtime, and total active time.
- Simple, streamlined installation; software detects the sensor automatically.
- Reset count at the end of a shift or configure triggers to reset automatically.
- Display the data on your production floor using our custom dashboard option.
- Ideal for monitoring machine utilization and ROI on large capital investments.
-
The Leap wireless flood detection transceiver utilizes an orange-colored liquid sensing cable that can cover a large area. If water contacts the cable, at any point along its length, the Leap wireless sensor will report that a liquid is present. The software can be configured to send text, email, and telephone alerts when water is detected. A configuration screen allows for entering saturation levels to report the level of wetness. Contact us with questions or to request a custom length of the water detecting cable. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless refrigerator and freezer temperature sensor continuously monitors the internal temperature of your refrigerator or freezer. Set alerts via phone, text, or email to know about issues even if you're not on-site. Streamline auditing processes. Ideal for temperature-critical applications such as laboratories, medical facilities, vaccine storage, medicine storage. This refrigerator/freezer monitoring system is designed with key features that are only available in the Leap product line:- Single sensor and dual sensor (2 temperature and 2 door-open sensors) available.
- Paper-thin cable maintains gasket seal integrity.
- Easily replaceable NIST-traceable tip for simple calibration.
- Industrial door-open sensor helps troubleshoot temperature alerts, as well as tracking each time the door is opened. Sensor device node takes a reading and transmits every time the door is opened and closed.
- Time that door is left open is reported - and alarms can be set on excessive door-open time.
- Optional wall transformer powers the sensor and also alerts power outages. On-board battery backup assures sensor node operation during power outages.
- Fast, simple installation with cold-proof foil stickers and adhesive-backed hook-and-loop.
- Thermal mass bottle prevents false alarms from defrost cycles or when the door is opened.
- Know for sure the sensor is connected & working with LED indicator light.
-
The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Improve factory visibility and efficiency with a wireless production counter sensor designed for real-time production tracking and production monitoring. This industrial counting sensor counts each unit moving along a conveyor or production line that passes by using a photo eye or proximity sensor, functioning as a reliable product counter and production counter for manufacturing operations. It uses our proprietary edge logic to record outputs, providing accurate production data without manual input.- Calculates the time between each product's pass to identify when downtime occurs and its duration.
- Displays current state of the line, up or down.
- Real-time manufacturing tracking triggers text, email, and telephone alerts when the downtime exceeds certain user-set limits.
- Easy installation – 5 minutes to set up.
- Count-reset button on top of the enclosure resets the count at the end of a shift.
- Functions as a production monitoring system, tracking 10 manufacturing KPIs, including: machine utilization, product counts, downtime events, OEE, stop counts, total downtime, and total active time.
-
This unique Leap wireless sensor is less than 5mm thick and supports 9 ultra-small, high-accuracy RTD sensors.- 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
- The entire sensor is rated to operate up to at least 125C (257F).
- Readings as fast as every 3 seconds for each of the 9 sensors.
- Data logging capability when the transceiver node is not linked to a gateway.
- Silicon wafer processing
- Scientific experiments
- Paint and coatings curing
- Temperature profiling over a surface
-
The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 10 V output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts. No external power source is needed. Contact us to let us help you make your selected 0 - 10 V sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 5 V output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts. No external power source is needed. Contact us to let us help you make your selected 0 - 5 V sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
One of our most popular sensors, the wireless transceiver node can integrate 2 to 12 standard RTD or PRT temperature sensors. Ideal for applications that need temperature monitoring of multiple items, or temperature gradients across a large area. Select from a wide range of off-the-shelf precision RTD or PRT temperature sensors. 3-wire configuration assures high accuracy. Contact us to find the temperature sensor configuration that is the best fit for your application. PRT RTD temperature senors priced separately. Part of the breakthrough Leap Sensors® system. Build your quote here: