Wireless Sensors & Data Loggers for the Industrial IoT
These wireless sensors are part of the Leap Sensors® wireless remote industrial monitoring system. It is THE system designed from the ground up to meet the specific, challenging needs of industrial & commercial users. Get better process control, failure prevention, safety improvement, automated auditing. Make the leap to the Industrial IoT – talk to an expert today.
- Long-life battery (up to 7 years, depending on application).
- Monitor temperature and more – vibration, amp, humidity, etc.
- Multiple sensors per transceiver node keep cost down.
- Easy to install in 5 minutes or less. Receive alerts via cellphone, laptop, or other mobile device.
Learn more about the Leap Sensors system.
-
This Leap wireless transceiver node can integrate any off-the-shelf PRT or RTD Temperature sensor. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1TXX). See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us for help integrating the best sensor probe for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This Leap wireless sensor has a standard mini thermocouple connectors that can connect to any thermocouple. (Standard products comes with K-Type thermocouples.) Other thermocouple types are also available - type-B, type-S, etc. Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many industrial applications - and is one of our most popular industrial wireless sensors. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This Leap wireless sensor has two standard mini thermocouple connectors that can connect to any K-type thermocouple.  Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many harsh industrial applications. Part of the breakthrough Leap Sensors® system. Build your quote here:
-
This Leap wireless sensor has eight standard mini thermocouple connectors that can connect to any type of thermocouple (type K is standard). Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many harsh industrial applications.
-
The Leap wireless thermowell sensor can integrate 1 to 9 PT100 thermowells. See our standard offerings below. Contact us if you need a different temperature probe. Part Numbers: LBI0-xT04 - 4" probe, LBI0-xT05 - 6" probe, LBI0-xT06 - 12" probe.  x=number of thermowells. Part of the breakthrough Leap Sensors® system. This wireless sensor is typically customized to specific applications. The price is for the basic, one-thermowell model. Include your requirements and we will reply with an exact quote. Build your quote here: -
This wireless temperature sensor employs a heavy-duty 4-inch metal probe. Ideal for remote monitoring of heating and cooling temperatures during meat & poultry processing.- Rugged probe: 3/16″ diameter needle that reduces to 0.15″ at the tip.
- Wide temperature range: from -40 to 500 degrees Fahrenheit.
- Rapid response time of 5 seconds in liquid.
- Data logging makes tracking & storing internal meat temperature to streamline USDA Appendix A & B compliance.
Wide variety of probes available. Contact us to learn about options for your specific applications. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application
-
Ultra-low temperature (ULT) sensor system gives continuous remote monitoring of the internal temperature of ultra-low temperature (ULT) freezers. Set alerts via phone, text, or email to know about issues even if you're not on-site. Streamline auditing processes. Ideal for temperature-critical applications such as laboratories, medical facilities, vaccine storage, medicine storage. This remote monitoring system for ULT freezers is designed with key features exclusive to Leap Sensors:- High accuracy RTD sensing at ultra low temperatures - as low as -196ºC (-320ºF).
- Temperature probe is verified and calibrated at 3 points: -60ºC, -40ºC, and +5ºC (-76ºF, -40ºF, and +41ºF)
- Optional industrial door-open sensor helps troubleshoot temperature alerts, as well as tracking each time the door is opened. Time that door is left open is reported - and alarms can be set on excessive door-open time.
- Optional wall transformer powers the sensor and also alerts power outages. On-board battery backup assures sensor node operation during power outages.
-
The Leap wireless refrigerator and freezer temperature sensor continuously monitors the internal temperature of your refrigerator or freezer. Set alerts via phone, text, or email to know about issues even if you're not on-site. Streamline auditing processes. Ideal for temperature-critical applications such as laboratories, medical facilities, vaccine storage, medicine storage. This refrigerator/freezer monitoring system is designed with key features that are only available in the Leap product line:- Single sensor and dual sensor (2 temperature and 2 door-open sensors) available.
- Paper-thin cable maintains gasket seal integrity.
- Easily replaceable NIST-traceable tip for simple calibration.
- Industrial door-open sensor helps troubleshoot temperature alerts, as well as tracking each time the door is opened. Sensor device node takes a reading and transmits every time the door is opened and closed.
- Time that door is left open is reported - and alarms can be set on excessive door-open time.
- Optional wall transformer powers the sensor and also alerts power outages. On-board battery backup assures sensor node operation during power outages.
- Fast, simple installation with cold-proof foil stickers and adhesive-backed hook-and-loop.
- Thermal mass bottle prevents false alarms from defrost cycles or when the door is opened.
- Know for sure the sensor is connected & working with LED indicator light.
Note: transceiver node configuration
The transceiver node can be configured with one or two temperature sensors, replaceable calibrated temperature probes, zero to two door-open sensors, an optional thermal bottle, and battery power or wall power. Please specify the configuration that you need and we will send you a final quote to your exact specifications. Build your quote here: -
This highly versatile industrial sensor supports 6 to 9 miniature, low-mass precision RTD temperature sensors connected to a transceiver node in an industrial enclosure. Ideal for data center rack remote monitoring.- 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
- Readings as fast as every 3 seconds for each of the sensors.
- Data logging capability when the transceiver node is not linked to a gateway.
- Option to integrate existing rack monitoring probes for "plug & play" installation.
-
This highly versatile industrial sensor supports 9 miniature, low-mass precision RTD temperature sensors connected to a high-temperature transceiver node in an industrial enclosure.
- 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
- The entire sensor is rated to operate up to at least 125C (257F).
- Readings as fast as every 3 seconds for each of the 9 sensors.
- Data logging capability when the transceiver node is not linked to a gateway.
-
Wireless rtd temperature sensor is embedded in ultra-strong magnet to mount the transceiver node to your equipment in seconds. Ideal for monitoring large gearboxes, bearings, and motors for overheating. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Vibration sensor can measure G-forces. Vibration sensor takes a simple yet highly effective approach in monitoring maximum and average g-force trends of +/-16G and can sample at up to 5 KHz on all 3 axes. The accelerometer has optional advanced on-board edge computing FFT capabilities. Customized options include vibration, tilt, and shock events. Up to 8 vibration modules can be attached to one transceiver node. The vibration module also includes a temperature sensor.Video Demonstration and Tutorial
Transceiver Node Configuration
Vibration+Temperature Modules: The number of vibration/temperature modules (1-8) connected to the Vibration Transceiver Node can be selected on the vibration module page. Build your quote here: