-
This popular K-Type Thermocouple uses a strong magnet to attach to ferrous (such as steel) surfaces. Comes with a mini connector to quickly plug in to Phase IV sensors. Add to quote here: -
This Leap software option installs on the Leap gateway. The software is comprised of two main parts - a user interface and a database. The software allows the user to monitor the sensor data, graph data, set email and text alerts, change sensor settings. The software is web-based - so a user logs into the software using a standard web browser, such as Chrome. There is no software or app to install. For PC-based systems, the software runs on a powerful single-board computer inside the Leap gateway. Cloud or server-based systems can be accessed with any web-connected device and the user password. Part of the breakthrough Leap Sensors® system. -
Put all of your most important sensor data and graphs on one page with the dashboard option in the Leap software. See how your equipment is performing at a glance - ideal for the manufacturing floor. Option to have the display be pre-configured for you by Phase IV, or select the option to configure your own dashboards. Part of the breakthrough Leap Sensors® system. Contact us for pricing on your specific requirements. -
The gateway continually runs off of the 5V from the battery module. When power is lost, the battery back up module supplies power to the gateway for approximately 2 days. The battery backup module plugs into a wall outlet to stay charged. Easy to install - plug the battery backup module into a wall outlet using a wall transformer. Connect the gateway to the battery backup module using the supplied cable. LEDs on the battery module show that battery charge level. Gateway is not included. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The wireless Range Extender acts as a repeater to extend the wireless transmission distance between sensor nodes and the gateway. When a sensor is out of range of the gateway, one or two range extenders may be placed between the two devices to bridge the wireless transmission gap. Range Extenders are powered by 5VDC from a 120VAC wall transformer. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless gateway receives the sensor data over the air from the Leap wireless transceiver nodes, then passes the data to the Leap software. This version connects to a local network via a cellular network. Easy to install - plug in the gateway, open a web browser, log in, and the Leap Sensors system is ready to manage. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless gateway receives the sensor data over the air from the Leap wireless transceiver nodes, then passes the data to the Leap software. This version connects to a PC via a USB cable. By changing the software configuration, it may be connected to a Local Area Network via an Ethernet Cable. The Leap web-based User Interface and database software run on a powerful single-board computer inside the gateway. Just plug in the gateway, open a web browser, log-in, and you are ready to interact with your Leap Wireless Sensor system. Part of the breakthrough Leap Sensors® system. Build your quote here:
-
Wireless gateway receives the sensor data over the air from the Leap wireless transceiver nodes, then passes the data to the Leap software. This version connects to a local network via standard Ethernet cable and RJ-45 connector. When the software resides on the gateway, the software may also be directly accessed using the USB port on the gateway. Easy to install - plug in the gateway, open a web browser, log in, and the Leap Sensors system is ready to manage. Part of the breakthrough Leap Sensors® system. Build your quote here:
-
A true leap advancement in wireless sensing, our multisensor node will support large number of sensors of different types on one Leap transceiver node. Part of the breakthrough Leap Sensors® system. Contact us for an exact quote to your specific application. Build your quote here: -
Integrate any sensor with an RS485, RS485 Modbus, or RS232 output into the Leap Sensors system to convert it to a wireless sensor. The sensor is powered by the battery in the Leap transceiver node with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected RS485 or RS232 sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed. Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: Contact us for pricing for your unique configuration. -
The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 5 V output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts. No external power source is needed. Contact us to let us help you make your selected 0 - 5 V sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here:
