-
This specially-designed wireless temperature sensor has 9 precision RTDs. The entire transceiver node can operate up to 250ºC (482ºF) - the highest-temperature-rated enclosure we offer. The node is less than 1 inch (2.5 cm) thick - able to ride on a wafer or circuit board through a reflow oven. For wafer temperature monitoring, RTD sensors are ultra-thin and small for a fast response to temperature changes. For other applications, virtually any other RTD sensor can be integrated, including pointed insertion probes for meat or food processing. 3-wire configuration on RTDs assures extra accuracy and immunity to the high-temperature environments. Sensor cable lengths can be made to order. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node with an RS485 Modbus RTU interface can read up to 10 Modbus registers to track valuable machine monitoring data. Can be used with almost any Modbus RTU sensor and communication device. Contact us to discuss best options for your application. Connect the transceiver node to a variable frequency drive (VFD) to collect data such as electric current draw, voltage levels, RPM, temperatures, and error conditions. Ideal for predictive maintenance or automated process auditing. Due to the high-power consumption of the Modbus RTU interface, this transceiver node typically uses a external power source to power the node. Battery power is an option if data sampling and transmitting is done every few hours. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1PXX). See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless pressure sensor has the best of both worlds - a mechanical gauge from WIKA integrated into a wireless sensor node. Get the advantages of wireless monitoring alerts, live data, and data storage, while still being able to check current pressure at a glance. Standard WIKA Bourdon tube pressure gauge scale ranges 0 to 1.6 bar to 0 to 400 bar. Other options available. Contact Us to integrate an application-specific pressure sensor with the Leap Sensors wireless system. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless submersible water level sensor/liquid level sensor remotely measures the depth of a liquid in a lake, river, pond, well, holding tank, etc. The transceiver node uses a submersible pressure transducer plus edge computing to convert the pressure measurement to liquid depth. Data is transmitted via a cellular connection directly to cloud software – no gateway required. Ideal for remote locations or for installations without power for a gateway.- 12 or 24V power supplied by oversized dual-D long-life battery – no external power source needed. (Option to connect to an external power source.)
- Optional water- and weatherproof enclosure protects the sensor node.
- Submersible pressure transducer is enclosed in a fully welded and hermetically sealed stainless steel case for long service life.
- Multiple sensors can be combined on one transceiver node. For example, add remote temperature monitoring.
-
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This version transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option. The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless submersible water level sensor/liquid level sensor remotely measures the depth of a liquid in a lake, river, pond, well, holding tank, etc. The transceiver node uses a submersible pressure transducer plus edge computing to convert the pressure measurement to liquid depth.
- 12 or 24V power supplied by oversized dual-D long-life battery – no external power source needed. (Option to connect to an external power source.)
- Optional water- and weatherproof enclosure protects the sensor node.
- Submersible pressure transducer is enclosed in a fully welded and hermetically sealed stainless steel case for long service life.
- Multiple sensors can be combined on one transceiver node. For example, add remote temperature monitoring.
-
Wireless transceiver node integrates from 2 up to 12 standard thermocouples to one wireless sensor node. Every thermocouple type is supported (K-type, T-type, B-type, J-type, S-type, N-type.) Ideal for multi-point monitoring of extreme low or high temperatures. Select from a wide range of off-the-shelf thermocouples and integrate up to 12 of them to one node with a standard mini bladed connector. Contact us to find the best thermocouple configuration that is the best fit for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
A great way to measure tank level when a non-contact method is required, this sensor mounts inside the lid of a tank, using an ultrasonic signal that bounces of the surface of the liquid to measure its depth. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless differential pressure gauge monitors at low pressure levels. This powerful sensor can be used alongside or as a replacement for magnehelic gauges when continuous remote equipment monitoring and alerts are needed. Ideal for monitoring HVAC filters, exhaust blowers, and differential pressure across clean rooms. Standard pressure ranges are: 0.15 PSID (-1P01) and 1.0 PSID (-1P07). Contact us for 0.3 PSID (-1P06, longer lead time).  Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type differential pressure switch with a "dry contact" switch output. The differential pressure switch featured with this product is a Cleveland Controls Air Sensing Switch, HVAC/General Purpose Type, 0.02 to 0.8 Differential (In. WC). Contact us to find the best combination or let us know which pressure switch you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This very unique wireless sensor works by comparing the readings from one device node to another user-selected device node - then reporting the local pressure, local temperature - then differential pressure and temperature as compared to a user selected sensor. For example, sensor A is located outside at ambient temperature and pressure. Sensor B is located in a clean room under positive pressure and Sensor C is located in a different part of the cleanroom under a higher positive pressure. Sensor B could be configured to report its pressure and temperature and the differential pressure between Sensor B and Sensor A. (See the screen shot). Sensor C could be configured to report its pressure and temperature and the differential pressure and temperature between sensor C and sensor B. Sensor readings are reported in PSIA. Leverage the Leap SensorManager software to send text, email, or telephone alerts when a pressure, temperature, or delta-pressure or delta-temperature threshold is exceeded. Integrate the data from the differential pressure sensors into other software using our web-based API, Modbus, DNP3, or other data interface protocols. The wireless sensor can be configured with pressure sensors that have different ranges, resolutions, and accuracies for different applications. See the specification below for more information on the different options. Pressure sensors can be configured to specific applications. The pressure and temperature sensors in the photos have the pressure and temperature sensor sealed inside the enclosure with a pressure port in the back of the enclosure. Part of the breakthrough Leap Sensors® system. Build your quote here:
