Thermocouples, Type K, Self-Adhesive, Surface Temperature, Molded Silicone Design

$65.00

These thermocouples are ideal for monitoring surface temperature using the Phase IV WSN Thermocouple WSN transmitter.

These sensors are available in 2 different mounting styles for flat or curved surfaces. The integral thermocouple sensor is bonded onto the inner surface of the self adhesive aluminum foil strip, which is provided for faster response times.

Description

Surface temperature thermocouple to be used with WSN Thermocouple Transmitter.

These sensors are available in 2 different mounting styles for flat or curved surfaces. The integral thermocouple sensor is bonded onto the inner surface of the self adhesive aluminum foil strip, which is provided for faster response times.

• Ultra-Slim Silicone Rubber for Maximum Flexibility
• Self-Adhesive Foil Backing for Faster Response Time
• 2 Styles Available for Flat or Curved Surfaces
• Resistant to a Variety of Chemicals and Oils
• Temperature Range -50 to 200°C (-58 to 392°F)
• 24 AWG Stranded Thermocouple-Grade Lead Wire

SA2C-K-120

  • Type K
  • 15 x 50 mm (0.59 x 1.97″) curved surface sensor
  • 3 m (120″) lead wire <wires may be cut to shorter lengths and re-attached to connector using terminal screws on the connector>
  • Mating connector for WSN Thermocouple transmitter will be attached to the thermocouple.

SA2F-K-120

  • Type K
  • 35 x 12 mm (1.38 x 0.47″) flat surface sensor
  • 3 m (120″) lead wire <wires may be cut to shorter lengths and re-attached to connector using terminal screws on the connector>
  • Mating connector for WSN Thermocouple transmitter will be attached to the thermocouple.

Additional information

Thermocouple Type

SA2F-K (thin), SA2C-K (wide)