-
Get instantaneous flow rate information without cutting into pipes and running signal wires. The Leap Sensors wireless transceiver node can integrate with a wide range of ultrasonic and Doppler clamp-on flow meters. Connect to plant software with the Modbus interface or use Leap's cloud-based software. Due to the large power consumption of ultrasonic and Doppler flow meters, the flow meter must be powered by 120V. Data from the flow meter is sent wirelessly via a gateway to the software. Clamp-on flow meters are available for a wide range of pipe sizes from 0.5 to 48 inches. Use for metal or plastic pipes. Contact us to find the best clamp-on flow sensor for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This specially-designed wireless temperature sensor has 9 precision RTDs. The entire transceiver node can operate up to 250ºC (482ºF) - the highest-temperature-rated enclosure we offer. The node is less than 1 inch (2.5 cm) thick - able to ride on a wafer or circuit board through a reflow oven. For wafer temperature monitoring, RTD sensors are ultra-thin and small for a fast response to temperature changes. For other applications, virtually any other RTD sensor can be integrated, including pointed insertion probes for meat or food processing. 3-wire configuration on RTDs assures extra accuracy and immunity to the high-temperature environments. Sensor cable lengths can be made to order. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node with an RS485 Modbus RTU interface can read up to 10 Modbus registers to track valuable machine monitoring data. Can be used with almost any Modbus RTU sensor and communication device. Contact us to discuss best options for your application. Connect the transceiver node to a variable frequency drive (VFD) to collect data such as electric current draw, voltage levels, RPM, temperatures, and error conditions. Ideal for predictive maintenance or automated process auditing. Due to the high-power consumption of the Modbus RTU interface, this transceiver node typically uses a external power source to power the node. Battery power is an option if data sampling and transmitting is done every few hours. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1PXX). See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless pressure sensor has the best of both worlds - a mechanical gauge from WIKA integrated into a wireless sensor node. Get the advantages of wireless monitoring alerts, live data, and data storage, while still being able to check current pressure at a glance. Standard WIKA Bourdon tube pressure gauge scale ranges 0 to 1.6 bar to 0 to 400 bar. Other options available. Contact Us to integrate an application-specific pressure sensor with the Leap Sensors wireless system. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless submersible water level sensor/liquid level sensor remotely measures the depth of a liquid in a lake, river, pond, well, holding tank, etc. The transceiver node in the wireless water pressure sensor uses a submersible pressure transducer plus edge computing to convert the pressure measurement to liquid depth. Our remote water level monitoring system includes:- 12 or 24V power supplied by oversized dual-D long-life battery – no external power source needed. (Option to connect to an external power source.)
- Optional water- and weatherproof enclosure protects the sensor node.
- Submersible pressure transducer is enclosed in a fully welded and hermetically sealed stainless steel case for long service life.
- Multiple sensors can be combined on one transceiver node. For example, add remote temperature monitoring.
-
Wireless differential pressure gauge monitors at low pressure levels. This powerful sensor can be used alongside or as a replacement for magnehelic gauges when continuous remote equipment monitoring and alerts are needed. Ideal for monitoring HVAC filters, exhaust blowers, and differential pressure across clean rooms. Standard pressure ranges are: 0.15 PSID (-1P01) and 1.0 PSID (-1P07). Â Build your quote here: -
The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless submersible water level sensor/liquid level sensor remotely measures the depth of a liquid in a lake, river, pond, well, holding tank, etc. The transceiver node uses a submersible pressure transducer plus edge computing to convert the pressure measurement to liquid depth. Data is transmitted via a cellular connection directly to cloud software – no gateway required. Ideal for remote locations or for installations without power for a gateway.
- 12 or 24V power supplied by oversized dual-D long-life battery – no external power source needed. (Option to connect to an external power source.)
- Optional water- and weatherproof enclosure protects the sensor node.
- Submersible pressure transducer is enclosed in a fully welded and hermetically sealed stainless steel case for long service life.
- Multiple sensors can be combined on one transceiver node. For example, add remote temperature monitoring.
-
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This industrial grade cellular pressure sensor transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option. The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node integrates from 2 up to 12 standard thermocouples to one wireless sensor node. Every thermocouple type is supported (K-type, T-type, B-type, J-type, S-type, N-type.) Ideal for multi-point monitoring of extreme low or high temperatures. Select from a wide range of off-the-shelf thermocouples and integrate up to 12 of them to one node with a standard mini bladed connector. Contact us to find the best thermocouple configuration that is the best fit for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
