-
The Leap wireless transceiver can integrate with most sensors with a CAN bus interface. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected CAN bus sensor wireless. Part of the breakthrough Leap Sensors® system. Contact us with the details of the CAN sensor that you want to integrate with the Leap wireless sensor system. Build your quote here: -
Coming Soon
This unique Leap wireless sensor can install in the threaded grease zerk hole in bearings. Remove the grease zerk, install the sensor, then re-install the zerk back into the sensor. Grease guns may be used to continue grease the bearing using the zerk mounted on the Leap sensor. Mounting adapters also facilitate easy installation on any type of machine. Accelerometer readings (in all 3 axes) are taken at 5 KHz, then edge-processed into the top predictors of failures. Temperature and 3-axis vibration sensors are mounted in the stainless steel base. Send text, email, and phone alerts when temperature vibration limits are exceeded. Data integrates easily into PLCs or other plant monitoring software. Bulk accelerometer reading downloads are also available as an option. Contact us to talk to an expert and find the best solution. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique Leap wireless sensor attaches to the top of a silicon wafer for fabrication process monitoring. It is less than 5mm thick, so it fits in wafer processing ovens and other critical fab equipment. The sensor has 9 ultra-small, high-accuracy RTD sensors that are adhered to the surface of the wafer, giving you better accuracy than a wireless thermocouple wafer sensor (tc wafer sensor).- 3-wire RTD connection supports long cables while maintaining temperature accuracy during rapid heating.
- The entire sensor is rated to operate up to at least 125C (257F).
- Readings as fast as every 3 seconds for each of the 9 sensors.
- Field replaceable batteries.
- Data logging capability when the transceiver node is not linked to a gateway.
- Silicon wafer processing
- Temperature chuck testing/verification
- Scientific experiments
- Paint and coatings curing
- Temperature profiling over a surface
-
The Leap wireless flood detection transceiver utilizes an orange-colored liquid sensing cable that can cover a large area. If water contacts the cable, at any point along its length, the Leap wireless sensor will report that a liquid is present. The software can be configured to send text, email, and telephone alerts when water is detected. A configuration screen allows for entering saturation levels to report the level of wetness. Contact us with questions or to request a custom length of the water detecting cable. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless oil leak detection transceiver utilizes a blue-colored oil-sensing cable that can cover a large area. If oil contacts the cable at any point along its length, the Leap wireless transceiver will report that oil is present. The software can be configured to send text, email, and telephone alerts when oil is detected. Contact us with questions - or to request a custom length of the water detecting cable. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.Wireless Strain Demonstration and Tutorial
Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application. We offer easy-to-install spot-weld-on strain sensors. We also have a Micro Measurements battery-powered spot welder available for rent. Build your quote here:
wireless strain sensor demonstration and tutorial
-
Wireless transceiver node designed to integrate with any ring force transducer that has one of these outputs: mV/V, 4-20 mA, or 0-10V. The Leap transceiver node provides power to the ring force transducer. Ideal for monitoring preloads, testing equipment, clamping forces, and remote ongoing force and load monitoring. Contact us to find the best ring force transducer configuration for your specific application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.Wireless Strain Demonstration and Tutorial
Contact us to find the best strain sensor configuration for your specific application.
Part of the breakthrough Leap Sensors® system.
Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application. We offer easy-to-install spot-weld-on strain sensors. We also have a Micro Measurements battery-powered spot welder available for rent.
Build your quote here: -
Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.Wireless Strain Demonstration and Tutorial
Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application. We offer easy-to-install spot-weld-on strain sensors. We also have a Micro Measurements battery-powered spot welder available for rent. Build your quote here:wireless strain sensor demonstration and tutorial
-
Breakthrough technology uses CAN bus to "daisy chain" multiple small strain gauge sensor modules to one wireless Leap transceiver node. Anywhere from 1 to 16 strain gauge modules can be added to the bus. Each CAN strain module can support 2 full-bridge resistive strain gauge sensors, for a total of up to 32 full-bridge strain gauges per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring of strain in multiple points along structural components such as I-beams, girders, hanging structures, support columns, railways etc., as well as industrial applications such as rotating shafts in engines, turbines, etc.Wireless Strain Demonstration and Tutorial
Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Multiple strain sensing modules attach to the transceiver node over a CAN bus. Each module can support two full-bridge strain sensors. The strain modules are ordered separately. Contact Us and an Application Engineer will work with you to provide a detailed final quote that meets your specific application. Build your quote here:wireless strain sensor demonstration and tutorial
-
Wireless transceiver node designed to integrate with all types of load cell sensors.Wireless Load Cell Demonstration and Tutorial
Contact us to find the best load cell configuration for your specific application. Part of the breakthrough Leap Sensors® system. Build your quote here:wireless strain sensor demonstration and tutorial
-
Sensor transceiver node designed to integrate with a wide range of linear position sensors and crack monitors with common outputs such as 0-5V, 4-20 mA, and RS485. The crack monitor is powered from the battery in the Leap transceiver node. When combined with a wireless transmitter, these sensors are very effective at monitoring changes in cracks or other movement over time in remote locations. Part of the breakthrough Leap Sensors® system. The linear sensor that meets your specific requirements will be integrated and tested with this device node. Contact us to find the best linear position configuration for your specific application. This external linear crack sensor is not included in this price but will be included in a final quote. Build your quote here:
