Coming Soon. Contact us for details.
This Leap vibration and temperature device node could not be easier to install. The ultra-strong magnet mounts the device node to the equipment in seconds. Vibration and temperature is conducted through the magnet to the accelerometer and temperature sensor. Ideal for monitoring large gearboxes, bearings, and motors to detect impending failures. Part of the breakthrough Leap Sensors® system. Build your quote here:-
Ideal for monitoring temperature with a non-contact IR sensor. Standard model measures temperatures from -20C to 1000C with a 20:1 field of view. Contact us if you need an application specific wireless sensor with different specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique Leap wireless sensor is less than 5mm thick and supports 9 ultra-small, high-accuracy RTD sensors.- 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
- The entire sensor is rated to operate up to at least 125C (257F).
- Readings as fast as every 3 seconds for each of the 9 sensors.
- Data logging capability when the transceiver node is not linked to a gateway.
- Silicon wafer processing
- Scientific experiments
- Paint and coatings curing
- Temperature profiling over a surface
-
This Leap Sensor comes with a fast-to-install split-core AC amp clamp to sense the AC electrical current going to equipment. Amp clamps are a powerful industrial tool to monitor power usage and to monitor equipment for conditions that predict impending failures. A change in AC current to industrial equipment can be an early indication to plan downtime to prevent failures during production. A wide range of amp clamps can be integrated with the Leap system. Contact us with your specific needs.Price for 0-50A AC RMS current transformer. Contact us for pricing on other current transformer options.Contact UsPrices, Quotes, Questions...
Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?Contact Us -
The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This version transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option. The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
One of our most popular sensors, the wireless transceiver node can integrate 2 to 12 standard RTD or PRT temperature sensors. Ideal for applications that need temperature monitoring of multiple items, or temperature gradients across a large area. Select from a wide range of off-the-shelf precision RTD or PRT temperature sensors. 3-wire configuration assures high accuracy. Contact us to find the temperature sensor configuration that is the best fit for your application. PRT RTD temperature senors priced separately. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Get instantaneous flow rate information without cutting into pipes and running signal wires. The Leap Sensors wireless transceiver node can integrate with a wide range of ultrasonic and Doppler clamp-on flow meters. Connect to plant software with the Modbus interface or use Leap's cloud-based software. Due to the large power consumption of ultrasonic and Doppler flow meters, the flow meter must be powered by 120V. Data from the flow meter is sent wirelessly via a gateway to the software. Clamp-on flow meters are available for a wide range of pipe sizes from 0.5 to 48 inches. Use for metal or plastic pipes. Contact us to find the best clamp-on flow sensor for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This specially-designed wireless temperature sensor has 9 precision RTDs. The entire transceiver node can operate up to 250ºC (482ºF) - the highest-temperature-rated enclosure we offer. The node is less than 1 inch (2.5 cm) thick - able to ride on a wafer or circuit board through a reflow oven. For wafer temperature monitoring, RTD sensors are ultra-thin and small for a fast response to temperature changes. For other applications, virtually any other RTD sensor can be integrated, including pointed insertion probes for meat or food processing. 3-wire configuration on RTDs assures extra accuracy and immunity to the high-temperature environments. Sensor cable lengths can be made to order. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node with an RS485 Modbus RTU interface can read up to 10 Modbus registers to track valuable machine monitoring data. Can be used with almost any Modbus RTU sensor and communication device. Contact us to discuss best options for your application. Connect the transceiver node to a variable frequency drive (VFD) to collect data such as electric current draw, voltage levels, RPM, temperatures, and error conditions. Ideal for predictive maintenance or automated process auditing. Due to the high-power consumption of the Modbus RTU interface, this transceiver node typically uses a external power source to power the node. Battery power is an option if data sampling and transmitting is done every few hours. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1PXX). See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless pressure sensor has the best of both worlds - a mechanical gauge from WIKA integrated into a wireless sensor node. Get the advantages of wireless monitoring alerts, live data, and data storage, while still being able to check current pressure at a glance. Standard WIKA Bourdon tube pressure gauge scale ranges 0 to 1.6 bar to 0 to 400 bar. Other options available. Contact Us to integrate an application-specific pressure sensor with the Leap Sensors wireless system. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: