- 3-wire RTD connection supports long cables while maintaining temperature accuracy during rapid heating.
- The entire sensor is rated to operate up to at least 125ºC (257ºF).
- Readings as fast as every 10 seconds for each of the 9 sensors.
- Field replaceable batteries.
- Data logging capability when the transceiver node is not linked to a gateway.
Wireless Sensors & Data Loggers for Specialized for the IIoT
These wireless sensors for specialized applications are part of the Leap Sensors® wireless remote industrial monitoring system. It is THE system designed from the ground up to meet the specific, challenging needs of industrial & commercial users. Get better process control, failure prevention, safety improvement, automated auditing. Make the leap to the Industrial IoT – talk to an expert today.
Long-life battery (up to 7 years, depending on application).
Multiple sensors per module keep cost down.
Easy to install in 5 minutes or less. Receive alerts via cellphone, laptop, or other mobile device.
Learn more about the Leap Sensors system.
-
This unique Leap wireless sensor attaches to the top of a silicon wafer for fabrication process monitoring. It is less than 5mm thick, so it fits in wafer processing ovens and other critical fab equipment. The sensor has 9 ultra-small, high-accuracy RTD sensors that are adhered to the surface of the wafer, giving you better accuracy than a wireless thermocouple wafer sensor (tc wafer sensor). -
Coming Soon. Contact us for details.
This Leap vibration and temperature device node could not be easier to install. The ultra-strong magnet mounts the device node to the equipment in seconds. Vibration and temperature is conducted through the magnet to the accelerometer and temperature sensor. Ideal for monitoring large gearboxes, bearings, and motors to detect impending failures. Part of the breakthrough Leap Sensors® system. Build your quote here: -
A true leap advancement in wireless sensing, our multisensor node will support large number of sensors of different types on one Leap transceiver node. Part of the breakthrough Leap Sensors® system. Contact us for an exact quote to your specific application. Build your quote here: -
Wireless transceiver node integrates from 2 up to 12 standard thermocouples to one wireless sensor node. Every thermocouple type is supported (K-type, T-type, B-type, J-type, S-type, N-type.) Ideal for multi-point monitoring of extreme low or high temperatures. Select from a wide range of off-the-shelf thermocouples and integrate up to 12 of them to one node with a standard mini bladed connector. Contact us to find the best thermocouple configuration that is the best fit for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This Leap wireless sensor has a standard mini thermocouple connectors that can connect to any thermocouple. (Standard products comes with K-Type thermocouples.) Other thermocouple types are also available - type-B, type-S, etc. Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many industrial applications - and is one of our most popular industrial wireless sensors. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This highly versatile industrial sensor supports 9 miniature, low-mass precision RTD temperature sensors connected to a high-temperature transceiver node in an industrial enclosure.- 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
- The entire sensor is rated to operate up to at least 125C (257F).
- Readings as fast as every 3 seconds for each of the 9 sensors.
- Data logging capability when the transceiver node is not linked to a gateway.
-
Integrate any sensor with an RS485, RS485 Modbus, or RS232 output into the Leap Sensors system to convert it to a wireless sensor. The sensor is powered by the battery in the Leap transceiver node with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected RS485 or RS232 sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node designed to integrate with any ring force transducer that has one of these outputs: mV/V, 4-20 mA, or 0-10V. The Leap transceiver node provides power to the ring force transducer. Ideal for monitoring preloads, testing equipment, clamping forces, and remote ongoing force and load monitoring. Contact us to find the best ring force transducer configuration for your specific application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Sensor transceiver node designed to integrate with a wide range of piezometers that have a mV/V, 4-20 mA, or 0-5 V or 0-12V output. Wireless piezometers are typically used for monitoring fluid pressures or pore water pressure in embankments, boreholes, standpipes, reservoirs, and tanks. Maximum pressure ranges from 100 kPa to 6 MPa. Contact us to find the best piezometer configuration for your specific application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique motor sensor combines 3 different sensors in one multi-sensor node: temperature, vibration, and electrical current. Get continuous remote monitoring of these key predictors of motor failure. Receive alerts via text, email, or phone. Avoid costly downtime and gain operating insight. It's like having X-ray vision into your key processes.- The only system currently available that combines all three types sensors on one transceiver node. Get sophisticated monitoring at a real-world price.
- Installs quickly & safely: temperature sensor and vibration sensor (accelerometer) install quickly with industrial-strength magnets or screw mount. Current sensor is a split-core amp clamp.
- The standard vibration sensor takes a simple yet highly effective and proven approach by sampling at 5KHz and edge-computing the data to report RMS acceleration, RMS velocity, and peak acceleration.
- Store data & manage alerts with our SensorManager.com software, or integrate into your own PLC or other software.
-
Wireless transceiver node with an RS485 Modbus RTU interface can read up to 10 Modbus registers to track valuable machine monitoring data. Can be used with almost any Modbus RTU sensor and communication device. Contact us to discuss best options for your application. Connect the transceiver node to a variable frequency drive (VFD) to collect data such as electric current draw, voltage levels, RPM, temperatures, and error conditions. Ideal for predictive maintenance or automated process auditing. Due to the high-power consumption of the Modbus RTU interface, this transceiver node typically uses a external power source to power the node. Battery power is an option if data sampling and transmitting is done every few hours. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This wireless temperature sensor employs a heavy-duty 4-inch metal probe. Ideal for remote monitoring of heating and cooling temperatures during meat & poultry processing.- Rugged probe: 3/16″ diameter needle that reduces to 0.15″ at the tip.
- Wide temperature range: from -40 to 500 degrees Fahrenheit.
- Rapid response time of 5 seconds in liquid.
- Data logging makes tracking & storing internal meat temperature to streamline USDA Appendix A & B compliance.
Wide variety of probes available. Contact us to learn about options for your specific applications. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application