Pressure Sensors

Wireless Pressure Sensors & Data Loggers for the IIoT

These wireless pressure sensors are part of the Leap Sensors® wireless remote industrial monitoring system. It is THE system designed from the ground up to meet the specific, challenging needs of industrial & commercial users such as wireless differential pressure sensors and wireless air pressure gauges. Get better process control, failure prevention, safety improvement, automated auditing. Make the leap to the Industrial IoT – talk to an expert today.

  • Long-life battery (5-8 years, depending on application).
  • Monitor remote pressure sensors and more – temperature, vibration, amp, humidity, etc.
  • Multiple sensors per module keep cost down.
  • Easy to install in 5 minutes or less. Receive alerts via cellphone, laptop, or other mobile device.

Learn more about the Leap Sensors system.

  • The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs.

    Configured to Your Exact Application

    The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery.  No external power source is needed with the 12/24V power supply option (LP-1PXX).  See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Wireless differential pressure gauge monitors at low pressure levels. This powerful sensor can be used alongside or as a replacement for magnehelic gauges when continuous remote equipment monitoring and alerts are needed. Ideal for monitoring HVAC filters, exhaust blowers, and differential pressure across clean rooms. Standard pressure ranges are: 0.15 PSID (-1P01) and 1.0 PSID (-1P07).  Contact us for 0.3 PSID (-1P06, longer lead time).      Build your quote here:
  • Coming Soon!

    The Leap wireless pressure transceiver integrates with any WIKA PGT21 mechanical pressure gauge. The sensor is powered by the Leap Sensor device battery. No external power source is needed. Contact us to let us help you make your selected pressure gauge wireless.   Part of the breakthrough Leap Sensors® system.   Build your quote here: Coming soon!  Contact us for pricing.
  • The Leap wireless pressure transceiver can integrate with every type differential pressure switch with a "dry contact" switch output. The differential pressure switch featured with this product is a Cleveland Controls Air Sensing Switch, HVAC/General Purpose Type, 0.02 to 0.8 Differential (In. WC). Contact us to find the best combination or let us know which pressure switch you would like us to integrate.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • This very unique wireless sensor works by comparing the readings from one device node to another user-selected device node - then reporting the local pressure, local temperature - then differential pressure and temperature as compared to a user selected sensor. For example, sensor A is located outside at ambient temperature and pressure.  Sensor B is located in a clean room under positive pressure and Sensor C is located in a different part of the cleanroom under a higher positive pressure.  Sensor B could be configured to report its pressure and temperature and the differential pressure between Sensor B and Sensor A.  (See the screen shot).  Sensor C could be configured to report its pressure and temperature and the differential pressure and temperature between sensor C and sensor B. Sensor readings are reported in PSIA. Leverage the Leap SensorManager software to send text, email, or telephone alerts when a pressure, temperature, or delta-pressure or delta-temperature threshold is exceeded. Integrate the data from the differential pressure sensors into other software using our web-based API, Modbus, DNP3, or other data interface protocols. The wireless sensor can be configured with pressure sensors that have different ranges, resolutions, and accuracies for different applications. See the specification below for more information on the different options. Pressure sensors can be configured to specific applications.  The pressure and temperature sensors in the photos have the pressure and temperature sensor sealed inside the enclosure with a pressure port in the back of the enclosure.   Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Sensor transceiver node designed to integrate with a wide range of piezometers that have a mV/V, 4-20 mA, or 0-5 V or 0-12V output. Wireless piezometers are typically used for monitoring fluid pressures or pore water pressure in embankments, boreholes, standpipes, reservoirs, and tanks. Maximum pressure ranges from 100 kPa to 6 MPa. Contact us to find the best piezometer configuration for your specific application.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless 4-20 mA transceiver node can integrate with every type of sensor with a 4-20mA output.

    Configured to Your Exact Application

    The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery.  No external power source is needed with the 12/24V power supply option (LP-1PXX).  See below for other options to configure this industrial wireless sensor node to your exact needs.   Contact us to let us help you make your selected 4-20 mA sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 10 V output.  The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts.  No external power source is needed.   Contact us to let us help you make your selected 0 - 10 V sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 5 V output.  The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts.  No external power source is needed.   Contact us to let us help you make your selected 0 - 5 V sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed.   Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here: Contact us for pricing for your unique configuration.
  • Integrate any sensor with an RS485, RS485 Modbus, or RS232 output into the Leap Sensors system to convert it to a wireless sensor. The sensor is powered by the battery in the Leap transceiver node with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected RS485 or RS232 sensor wireless.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • A true leap advancement in wireless sensing, our multisensor node will support large number of sensors of different types on one Leap transceiver node.
    • Select the combination of sensors that are needed for your application.
    • Universal design platform means cost-effective prototyping, low-volume sensor production, and short design lead times.
    • Monitor several sensors at one location on a machine.
    • Multiple sensors per sensor node is more cost-efficient.
      Part of the breakthrough Leap Sensors® system. Contact us for an exact quote to your specific application. Build your quote here:

Frequently Asked Questions about Pressure

Yes.  The user manual shows how to connect the wires from the standard pressure sensor to the spring-loaded terminal block inside the enclosure.  The Leap transceiver node can support one 4-20 mA sensor and three 0-10V sensors.  Just set the min and max values in the configuration screen along with the unit of measure for the pressure.

Yes – a powerful battery inside the enclosure can supply 12VDC or 24VDC to the sensor.  The sensor is powered-on right before it is read to minimize the battery drain.  Set the “settling time” for the sensor in the configuration options to assure the sensor is stabilized before it is read.

Yes.  For differential pressure, the Leap transceiver node calculates and sends the differential pressure so that alerts may be easily be created in the Leap Sensor Manager software on the differential pressure reading.

Yes.  The Leap transceiver node is wireless but uses a radio transmission that is different from a local area network – so it isn’t really a wifi wireless pressure sensor – but a wireless pressure sensor that communicates with the Leap gateway.

Common Applications for Pressure

  • Wireless differential pressure sensor
  • Wireless air pressure gauge
  • Wifi water pressure gauge
  • Remote water pressure gauge
  • Remote pressure sensor
  • Multiple wireless pressure sensors to one node
  • Wireless pressure sensors 4 – 20 mA
  • Wireless pressure sensor 0 – 10V
  • RS485 Modbus wireless pressure sensor
  • RS485 to wireless pressure sensing
  • RS232 to wireless pressure sensor
  • Wireless pressure differential sensor
  • Remote pressure monitoring
  • Remote wireless wifi pressure sensor monitoring
  • Wireless pressure switch
  • Wireless water pressure monitoring
  • Wireless gas pressure monitoring
  • Wireless compressed air remote monitoring
  • Combined wireless pressure and wireless temperature sensor monitoring
Go to Top