-
The Leap wireless pressure transceiver can integrate with every type of sensor with an I2C output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected I2C sensor wireless. Part of the breakthrough Leap Sensors® system. Contact us with the details of the I2C that you want to attach to the Leap Transceiver Node. Build your quote here: -
This wireless sensor communicates via a cellular transmission for remote temperature & flood monitoring. The internal antenna keeps the transceiver node small and resistant to damage. Sensor transceiver node combines standard mini k-type thermocouple connector for temperature sensing (wide temperature range) and a water sensor for flood detection. No gateway required – ideal for remote locations where standard sensors won’t work. Sensor node transmits via cellular link directly to cloud-based user interface. Receive alerts by email or text. “Practically battery-free”™ - Long battery life (up to 10 years, depending on application & transmission interval). Customize to your specific needs, including options to transmit only when designated thresholds are exceeded. Part of the breakthrough Leap Sensors system. Build your quote here: -
The Leap wireless transceiver can integrate with most sensors with a CAN bus interface. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected CAN bus sensor wireless. Part of the breakthrough Leap Sensors® system. Contact us with the details of the CAN sensor that you want to integrate with the Leap wireless sensor system. Build your quote here: -
This groundbreaking sensor node integrates a discrete pulse flow meter to count units of flow (i.e. gallons, liters, etc) as liquid flows through a line. Unit can also be used as an incremental encoder for monitoring machinery speeds and total output. The transceiver node times individual pulses and their accumulated counts as they occur. It then uses edge computing to determine current flow rates and total volume of liquid passing through the meter. The edge logic also identifies when flow has stopped, duration of flow events, and duration of stop events. For ease of analysis, the node calculates both instantaneous rate of flow and its duration since the last sensor data reset, as well as a value to indicate if flow is currently occurring.- Monitors 11 different output variables, such as pulses, flow rate, total pulses, total volume, etc. See specifications for more details.
- Transceiver node is powered by a 120V wall transformer that plugs into a jack on the bottom of the enclosure (no battery powered options available.) Data is transmitted wirelessly via a gateway to the software.
- Connects to the Leap Wireless Sensor System with a secure 2.4GHz, FCC-certified radio.
- Count-reset button on top of the node enclosure resets the total flow at the end of a measurement period. Users can also set automated resets based on time of day.
-
The Leap wireless flood detection transceiver utilizes an orange-colored liquid sensing cable that can cover a large area. If water contacts the cable, at any point along its length, the Leap wireless sensor will report that a liquid is present. The software can be configured to send text, email, and telephone alerts when water is detected. A configuration screen allows for entering saturation levels to report the level of wetness. Contact us with questions or to request a custom length of the water detecting cable. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless 4-20 mA transceiver node can integrate with every type of sensor with a 4-20mA output.Configured to Your Exact Application
The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1PXX). See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to let us help you make your selected 4-20 mA sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 10 V output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts. No external power source is needed. Contact us to let us help you make your selected 0 - 10 V sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 5 V output. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts. No external power source is needed. Contact us to let us help you make your selected 0 - 5 V sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed. Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: Contact us for pricing for your unique configuration. -
Integrate any sensor with an RS485, RS485 Modbus, or RS232 output into the Leap Sensors system to convert it to a wireless sensor. The sensor is powered by the battery in the Leap transceiver node with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected RS485 or RS232 sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The wireless Range Extender acts as a repeater to extend the wireless transmission distance between sensor nodes and the gateway. When a sensor is out of range of the gateway, one or two range extenders may be placed between the two devices to bridge the wireless transmission gap. Range Extenders are powered by 5VDC from a 120VAC wall transformer. Part of the breakthrough Leap Sensors® system. Build your quote here:
