- Rugged probe: 3/16″ diameter needle that reduces to 0.15″ at the tip.
- Wide temperature range: from -40 to 500 degrees Fahrenheit.
- Rapid response time of 5 seconds in liquid.
- Data logging makes tracking & storing internal meat temperature to streamline USDA Appendix A & B compliance.
Wireless sensors for remote monitoring of equipment and assets. Ideal for predictive maintenance or monitoring critical equipment such as freezers and coolers. Get alerts via text, email, or phone. Part of our Leap Sensors line for the Industrial IoT.
-
This wireless temperature sensor employs a heavy-duty 4-inch metal probe. Ideal for remote monitoring of heating and cooling temperatures during meat & poultry processing.Wide variety of probes available. Contact us to learn about options for your specific applications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This wireless sensor node replaces the discontinued Synapsense wireless temperature sensor module. The Leap sensor node has a connector that connects to existing Snapsense temperature sensor wiring harnesses. A Leap wireless gateway and Leap software are required. Data may be passed to other software using the web-API or Modubs. Convert your discontinued Synapsense monitoring system to the latest technology. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless rtd temperature sensor is embedded in ultra-strong magnet to mount the transceiver node to your equipment in seconds. Ideal for monitoring large gearboxes, bearings, and motors for overheating. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Coming Soon. Contact us for details.
This Leap vibration and temperature device node could not be easier to install. The ultra-strong magnet mounts the device node to the equipment in seconds. Vibration and temperature is conducted through the magnet to the accelerometer and temperature sensor. Ideal for monitoring large gearboxes, bearings, and motors to detect impending failures. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Ideal for monitoring temperature with a non-contact IR sensor. Standard model measures temperatures from -20C to 1000C with a 20:1 field of view. Contact us if you need an application specific wireless sensor with different specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This version transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway. The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option. The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Get instantaneous flow rate information without cutting into pipes and running signal wires. The Leap Sensors wireless transceiver node can integrate with a wide range of ultrasonic and Doppler clamp-on flow meters. Connect to plant software with the Modbus interface or use Leap's cloud-based software. Due to the large power consumption of ultrasonic and Doppler flow meters, the flow meter must be powered by 120V. Data from the flow meter is sent wirelessly via a gateway to the software. Clamp-on flow meters are available for a wide range of pipe sizes from 0.5 to 48 inches. Use for metal or plastic pipes. Contact us to find the best clamp-on flow sensor for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless transceiver node with an RS485 Modbus RTU interface can read up to 10 Modbus registers to track valuable machine monitoring data. Can be used with almost any Modbus RTU sensor and communication device. Contact us to discuss best options for your application. Connect the transceiver node to a variable frequency drive (VFD) to collect data such as electric current draw, voltage levels, RPM, temperatures, and error conditions. Ideal for predictive maintenance or automated process auditing. Due to the high-power consumption of the Modbus RTU interface, this transceiver node typically uses a external power source to power the node. Battery power is an option if data sampling and transmitting is done every few hours. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless pressure sensor has the best of both worlds - a mechanical gauge from WIKA integrated into a wireless sensor node. Get the advantages of wireless monitoring alerts, live data, and data storage, while still being able to check current pressure at a glance. Standard WIKA Bourdon tube pressure gauge scale ranges 0 to 1.6 bar to 0 to 400 bar. Other options available. Contact Us to integrate an application-specific pressure sensor with the Leap Sensors wireless system. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless sensor remotely measures the depth of a liquid in a tank or pond using a submersible pressure sensor. The Leap Sensor transceiver node uses edge computing to convert the pressure measurement to liquid depth. Completely battery-powered - no external power source needed. Optional water- and weather-proof enclosure protects the sensor transceiver node. Optional direct-to-cellular technology for remote locations. Data is sent directly to a cloud server. Contact us for the best combination of pressure sensor and other options for your application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
A great way to measure tank level when a non-contact method is required, this sensor mounts inside the lid of a tank, using an ultrasonic signal that bounces of the surface of the liquid to measure its depth. Part of the breakthrough Leap Sensors® system. Build your quote here: