Our wireless sensors for predictive maintenance monitor temperature, vibration, current, and more to help you predict equipment failure before it happens. Avoid costly unexpected shutdowns and get more insight into your critical processes.
-
A great way to measure tank level when a non-contact method is required, this sensor mounts inside the lid of a tank, using an ultrasonic signal that bounces of the surface of the liquid to measure its depth.See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This unique wireless pressure sensor has the best of both worlds - a mechanical gauge from WIKA integrated into a wireless sensor node. Get the advantages of wireless monitoring alerts, while still being able to check current pressure at a glance. The external pressure gauge is powered by 24V power supplied from the Leap Sensor node battery. No external power source is needed.Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application
-
The Leap wireless 12-thermocouple transceiver can integrate 2 to 12 standard thermocouples to one wireless sensor node. Every thermocouple type is supported.Select from a wide range of off-the-shelf thermocouples and integrate up to 12 of them to one node with a standard mini bladed connector. Contact us to find the best thermocouple configuration that is the best fit for your application. See the data sheet for detailed specifications. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application
-
- Wireless clamp-on flow transceiver can integrate with a wide range of ultrasonic and Doppler clamp-on flow meters - avoid cutting into pipes.
- Streamlined installation - no signal wires to run.
- Connect to plant software with the Modbus interface, or use Leap's cloud-based software.
Clamp-on flow meters are available for a wide range of pipe sizes from 0.5 to 48 inches. Use for metal or plastic pipes. The flow meter requires external 120V power, but the Leap transceiver node is battery-powered. Contact us to find the best clamp-on flow sensor to integrate with the Leap wireless sensor platform. See the data sheet for detailed specifications on the Leap 4-20mA wireless sensor node. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application
-
Wireless pressure transceiver integrates with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs. This version transmits directly to a cellular tower and does not require a gateway to pass the data to cloud software. Ideal for remote locations or for installations without power for a gateway.The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized dual-D Leap Sensor node battery. No external power source is needed with the 12/24V power supply option (LP-1PXX). The Leap transceiver node may also be optionally powered by an external voltage source. See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here:Configured to Your Application
-
The wireless Range Extender acts as a repeater to extend the wireless transmission distance between sensor nodes and the gateway. When a sensor is out of range of the gateway, one or two range extenders may be placed between the two devices to bridge the wireless transmission gap. Range Extenders are powered by 5VDC from a 120VAC wall transformer. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter. Part of the breakthrough Leap Sensors® system. Build your quote here: -
This wireless sensor communicates via a cellular transmission for remote temperature & flood monitoring. The internal antenna keeps the transceiver node small and resistant to damage. Sensor transceiver node combines standard mini k-type thermocouple connector for temperature sensing (wide temperature range) and a water sensor for flood detection. No gateway required – ideal for remote locations where standard sensors won’t work. Sensor node transmits via cellular link directly to cloud-based user interface. Receive alerts by email or text. “Practically battery-free”™ - Long battery life (up to 10 years, depending on application & transmission interval). Customize to your specific needs, including options to transmit only when designated thresholds are exceeded. Part of the breakthrough Leap Sensors system. Build your quote here: -
This vibration and temperature module connects over the CAN bus to the Wireless Motor Monitor transceiver node and send temperature and vibration data. Part of the breakthrough Leap Sensors® system for the IIoT. Build your quote here: -
Coming Soon
This Leap wireless sensor has eight standard mini thermocouple connectors that can connect to any type of thermocouple (type K is standard). Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many harsh industrial applications. -
Put all of your most important sensor data and graphs on one page with the Dashboard option in the Leap software. Dashboards can be configured for you by the Phase IV Engineering team - or select the option to configure your own dashboards.Contact us for pricing on your specific requirements.Contact UsPrices, Quotes, Questions...
Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?Contact Us -
This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed. Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: Contact us for pricing for your unique configuration. -
Wireless transceiver node designed to integrate with any ring force transducer that has one of these outputs: mV/V, 4-20 mA, or 0-10V. The Leap transceiver node provides power to the ring force transducer. Ideal for monitoring preloads, testing equipment, clamping forces, and remote ongoing force and load monitoring. Contact us to find the best ring force transducer configuration for your specific application. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Breakthrough technology uses CAN bus to "daisy chain" multiple load cell interface modules to one wireless Leap transceiver node. Anywhere from 2 to 30 load cell modules can be added to the bus. Each load cell module can support 2 full-bridge mV/V load cells, for a total of up to 60 load cells per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring loads and force in several places along structural components such as I-beams, girders, support columns, etc. Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Contact us for pricing on your specific configuration. Build your quote here: -
Sensor transceiver node designed to integrate with a wide range of linear position sensors and crack monitors with common outputs such as 0-5V, 4-20 mA, and RS485. The crack monitor is powered from the battery in the Leap transceiver node. When combined with a wireless transmitter, these sensors are very effective at monitoring changes in cracks or other movement over time in remote locations. Part of the breakthrough Leap Sensors® system. The linear sensor that meets your specific requirements will be integrated and tested with this device node. Contact us to find the best linear position configuration for your specific application. This external linear crack sensor is not included in this price but will be included in a final quote. Build your quote here: -
Breakthrough technology uses CAN bus to "daisy chain" multiple small strain gauge sensor modules to one wireless Leap transceiver node. Anywhere from 1 to 16 strain gauge modules can be added to the bus. Each CAN strain module can support 2 full-bridge resistive strain gauge sensors, for a total of up to 32 full-bridge strain gauges per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring of strain in multiple points along structural components such as I-beams, girders, hanging structures, support columns, railways etc., as well as industrial applications such as rotating shafts in engines, turbines, etc.Wireless Strain Demonstration and Tutorial
Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Multiple strain sensing modules attach to the transceiver node over a CAN bus. Each module can support two full-bridge strain sensors. The strain modules are ordered separately. Contact Us and an Application Engineer will work with you to provide a detailed final quote that meets your specific application. Build your quote here:
wireless strain sensor demonstration and tutorial
-
Ideal for monitoring temperature with a non-contact IR sensor. Standard model measures temperatures from -20C to 1000C with a 20:1 field of view. Contact us if you need an application specific wireless sensor with different specifications. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless flood detection transceiver utilizes an orange-colored liquid sensing cable that can cover a large area. If water contacts the cable, at any point along its length, the Leap wireless sensor will report that a liquid is present. The software can be configured to send text, email, and telephone alerts when water is detected. A configuration screen allows for entering saturation levels to report the level of wetness. Contact us with questions or to request a custom length of the water detecting cable. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless pressure transceiver can integrate with every type differential pressure switch with a "dry contact" switch output. The differential pressure switch featured with this product is a Cleveland Controls Air Sensing Switch, HVAC/General Purpose Type, 0.02 to 0.8 Differential (In. WC). Contact us to find the best combination or let us know which pressure switch you would like us to integrate. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Integrate any sensor with an RS485, RS485 Modbus, or RS232 output into the Leap Sensors system to convert it to a wireless sensor. The sensor is powered by the battery in the Leap transceiver node with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected RS485 or RS232 sensor wireless. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap ultra-low temperature (ULT) sensor system gives continuous remote monitoring of the internal temperature of your ultra-low temperature (ULT) freezer. Set alerts via phone, text, or email to know about issues even if you're not on-site. Streamline auditing processes. Ideal for temperature-critical applications such as laboratories, medical facilities, vaccine storage, medicine storage. This remote monitoring system for ULT freezers is designed with key features that are only available in the Leap product line:- Sensing temperature down to -80ºC, but lowest calibration point is -60ºC.
- High accuracy sensing in the calibrated range from -60ºC to 5ºC. Calibration target temperatures are -60ºC, -40ºC, and +5ºC.
- Optional door-open sensor helps trouble-shoot temperature alerts.
Contact us to find the best combination of features for your facility. Build your quote here:Configured to Your Application
-
Coming Soon. Contact us for details.
This Leap vibration and temperature device node could not be easier to install. The ultra-strong magnet mounts the device node to the equipment in seconds. Vibration and temperature is conducted through the magnet to the accelerometer and temperature sensor. Ideal for monitoring large gearboxes, bearings, and motors to detect impending failures. Part of the breakthrough Leap Sensors® system. Build your quote here: -
Wireless rtd temperature sensor is embedded in ultra-strong magnet to mount the transceiver node to your equipment in seconds. Ideal for monitoring large gearboxes, bearings, and motors for overheating. Part of the breakthrough Leap Sensors® system. Build your quote here: -
The Leap wireless transceiver can integrate with most sensors with a CAN bus interface. The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 3.6V to 24 volts. No external power source is needed. Contact us to let us help you make your selected CAN bus sensor wireless. Part of the breakthrough Leap Sensors® system. Contact us with the details of the CAN sensor that you want to integrate with the Leap wireless sensor system. Build your quote here: