Manufacturing & Industrial

Contact an Expert 1-866-608-6168

  • Available Q2 2023

    This unique Leap wireless sensor can install in the threaded grease zerk hole in bearings.  Remove the grease zerk, install the sensor, then re-install the zerk back into the sensor. Grease guns may be used to continue grease the bearing using the zerk mounted on the Leap sensor. Mounting adapters also facilitate easy installation on any type of machine. Accelerometer readings (in all 3 axes) are taken at 5 KHz, then edge-processed into the top predictors of failures. Temperature and 3-axis vibration sensors are mounted in the stainless steel base. Send text, email, and phone alerts when temperature vibration limits are exceeded. Data integrates easily into PLCs or other plant monitoring software. Bulk accelerometer reading downloads are also available as an option.   Contact us to talk to an expert and find the best solution. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless flood detection transceiver utilizes an orange-colored liquid sensing cable that can cover a large area.  If water contacts the cable, at any point along its length, the Leap wireless sensor will report that a liquid is present. The software can be configured to send text, email, and telephone alerts when water is detected. A configuration screen allows for entering saturation levels to report the level of wetness. Contact us with questions or to request a custom length of the water detecting cable.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless oil leak detection transceiver utilizes a blue-colored oil-sensing cable that can cover a large area. If oil contacts the cable at any point along its length, the Leap wireless transceiver will report that oil is present. The software can be configured to send text, email, and telephone alerts when oil is detected. Contact us with questions - or to request a custom length of the water detecting cable.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.

    Wireless Strain Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

    Contact us to find the best strain sensor configuration for your specific application.   Part of the breakthrough Leap Sensors® system.   Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application.  We offer easy-to-install spot-weld-on strain sensors.  We also have a Micro Measurements battery-powered spot welder available for rent. Build your quote here:
  • Wireless transceiver node designed to integrate with any ring force transducer that has one of these outputs: mV/V, 4-20 mA, or 0-10V.  The Leap transceiver node provides power to the ring force transducer. Ideal for monitoring preloads, testing equipment, clamping forces, and remote ongoing force and load monitoring. Contact us to find the best ring force transducer configuration for your specific application.       Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.

    Wireless Strain Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial   Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system.   Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application.  We offer easy-to-install spot-weld-on strain sensors.  We also have a Micro Measurements battery-powered spot welder available for rent. Build your quote here:
  • Integrate almost any strain sensor into a Leap Sensors wireless transceiver node for structural health monitoring (SHM) on bridges, overpasses, support beams, and more. Easy to install on existing structures. Be up & running in just a few minutes.

    Wireless Strain Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

      Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system.   Strain sensors are not included. Contact us and one of our experts can recommend strain gauges for your application.  We offer easy-to-install spot-weld-on strain sensors.  We also have a Micro Measurements battery-powered spot welder available for rent. Build your quote here:
  • Breakthrough technology uses CAN bus to "daisy chain" multiple small strain gauge sensor modules to one wireless Leap transceiver node. Anywhere from 1 to 16 strain gauge modules can be added to the bus. Each CAN strain module can support 2 full-bridge resistive strain gauge sensors, for a total of up to 32 full-bridge strain gauges per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring of strain in multiple points along structural components such as I-beams, girders, hanging structures, support columns, railways etc., as well as industrial applications such as rotating shafts in engines, turbines, etc.

    Wireless Strain Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

    Contact us to find the best strain sensor configuration for your specific application.     Part of the breakthrough Leap Sensors® system.   Multiple strain sensing modules attach to the transceiver node over a CAN bus. Each module can support two full-bridge strain sensors. The strain modules are ordered separately. Contact Us and an Application Engineer will work with you to provide a detailed final quote that meets your specific application. Build your quote here:
  • Wireless transceiver node designed to integrate with all types of load cell sensors.

    Wireless Load Cell Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

      Contact us to find the best load cell configuration for your specific application. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Sensor transceiver node designed to integrate with all types of pins to monitor weight and force on pulleys and rollers.

    Wireless Load Cell Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

      Contact us to find the best load pin configuration for your specific application. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless 4-20 mA transceiver node can integrate with every type of sensor with a 4-20mA output.

    Configured to Your Exact Application

    The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery.  No external power source is needed with the 12/24V power supply option (LP-1PXX).  See below for other options to configure this industrial wireless sensor node to your exact needs.   Contact us to let us help you make your selected 4-20 mA sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 10 V output.  The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts.  No external power source is needed.   Contact us to let us help you make your selected 0 - 10 V sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
Go to Top