Manufacturing & Industrial

Contact an Expert 1-866-608-6168

remote wireless temperature monitor sensor

  • This unique Leap wireless sensor is less than 5mm thick and supports 9 ultra-small, high-accuracy RTD sensors.
    • 3-wire RTD connection supports long cables while also maintaining high temperature accuracy.
    • The entire sensor is rated to operate up to at least 125C (257F).
    • Readings as fast as every 3 seconds for each of the 9 sensors.
    • Data logging capability when the transceiver node is not linked to a gateway.
    Ideal for these processes:
    • Silicon wafer processing
    • Scientific experiments
    • Paint and coatings curing
    • Temperature profiling over a surface
        Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Coming Soon!

    The Leap wireless pressure transceiver integrates with any WIKA PGT21 mechanical pressure gauge. The sensor is powered by the Leap Sensor device battery. No external power source is needed. Contact us to let us help you make your selected pressure gauge wireless.   Part of the breakthrough Leap Sensors® system.   Build your quote here: Coming soon!  Contact us for pricing.
  • Breakthrough technology uses CAN bus to "daisy chain" multiple load cell interface modules to one wireless Leap transceiver node. Anywhere from 2 to 30 load cell modules can be added to the bus. Each load cell module can support 2 full-bridge mV/V load cells, for a total of up to 60 load cells per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring loads and force in several places along structural components such as I-beams, girders, support columns, etc. Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Contact us for pricing on your specific configuration. Build your quote here:
  • This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed.   Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here: Contact us for pricing for your unique configuration.
  • Put all of your most important sensor data and graphs on one page with the Dashboard option in the Leap software. Dashboards can be configured for you by the Phase IV Engineering team - or select the option to configure your own dashboards.  
    Contact Us

    Prices, Quotes, Questions...

    Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?
    Contact Us
    Contact us for pricing on your specific requirements.
  • Coming Soon

    This Leap wireless sensor has eight standard mini thermocouple connectors that can connect to any type of thermocouple (type K is standard). Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many harsh industrial applications.  
    Contact Us

    Prices, Quotes, Questions...

    Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?
    Contact Us
  • This vibration and temperature module connects over the CAN bus to the Wireless Motor Monitor transceiver node and send temperature and vibration data.   Part of the breakthrough Leap Sensors® system for the IIoT.   Build your quote here:
  • Available Q2 2023

    This unique Leap wireless sensor can install in the threaded grease zerk hole in bearings.  Remove the grease zerk, install the sensor, then re-install the zerk back into the sensor. Grease guns may be used to continue grease the bearing using the zerk mounted on the Leap sensor. Mounting adapters also facilitate easy installation on any type of machine. Accelerometer readings (in all 3 axes) are taken at 5 KHz, then edge-processed into the top predictors of failures. Temperature and 3-axis vibration sensors are mounted in the stainless steel base. Send text, email, and phone alerts when temperature vibration limits are exceeded. Data integrates easily into PLCs or other plant monitoring software. Bulk accelerometer reading downloads are also available as an option.   Contact us to talk to an expert and find the best solution. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of sensor with a 0 - 10 V output.  The sensor is powered by the Leap Sensor device battery with a power supply that can be specified from 0 to 24 volts.  No external power source is needed.   Contact us to let us help you make your selected 0 - 10 V sensor wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless humidity sensor has the sensor "tethered" outside the enclosure to get an accurate reading. The sensor also reports temperature as part of its relative humidity reading.   Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type differential pressure switch with a "dry contact" switch output. The differential pressure switch featured with this product is a Cleveland Controls Air Sensing Switch, HVAC/General Purpose Type, 0.02 to 0.8 Differential (In. WC). Contact us to find the best combination or let us know which pressure switch you would like us to integrate.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • The Leap wireless pressure transceiver can integrate with every type of WIKA pressure transducer - 4-20mA, 0-10V, and I2C outputs.

    Configured to Your Exact Application

    The external industrial sensor may be powered by an optional 12 or 24V power supply driven from the over-sized Leap Sensor node battery.  No external power source is needed with the 12/24V power supply option (LP-1PXX).  See below for other options to configure this industrial wireless sensor node to your exact needs. Contact us to find the best combination or let us know which WIKA sensor you would like us to integrate.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
Go to Top