Manufacturing & Industrial

Contact an Expert 1-866-608-6168

remote wireless temperature monitor sensor

  • The Pressurized Dew Point (PDP) wireless sensor monitors the dew point temperature inside compressed air lines. Because water condenses at a higher temperature when the air is pressurized, the sensor sends an alert when the temperature inside the air lines is nearing the dew point. This provides the plant maintenance team ample warning to take action to head off major equipment malfunctions and damage. This Leap sensor integrates the Michell Easidew EA2 Moisture Meter.     Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • This wireless temperature sensor employs a heavy-duty 4-inch metal probe. Ideal for remote monitoring of heating and cooling temperatures during meat & poultry processing.
    • Rugged probe: 3/16″ diameter needle that reduces to 0.15″ at the tip.
    • Wide temperature range: from -40 to 500 degrees Fahrenheit.
    • Rapid response time of 5 seconds in liquid.
    • Data logging makes tracking & storing internal meat temperature to streamline USDA Appendix A & B compliance.
    Wide variety of probes available. Contact us to learn about options for your specific applications.   Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • This wireless sensor communicates via a cellular transmission for remote temperature & flood monitoring.  The internal antenna keeps the transceiver node small and resistant to damage. Sensor transceiver node combines standard mini k-type thermocouple connector for temperature sensing (wide temperature range) and a water sensor for flood detection. No gateway required – ideal for remote locations where standard sensors won’t work. Sensor node transmits via cellular link directly to cloud-based user interface. Receive alerts by email or text. “Practically battery-free”™ - Long battery life (up to 10 years, depending on application & transmission interval). Customize to your specific needs, including options to transmit only when designated thresholds are exceeded.     Part of the breakthrough Leap Sensors system.   Build your quote here:
  • This vibration and temperature module connects over the CAN bus to the Wireless Motor Monitor transceiver node and send temperature and vibration data.   Part of the breakthrough Leap Sensors® system for the IIoT.   Build your quote here:
  • Coming Soon

    This Leap wireless sensor has eight standard mini thermocouple connectors that can connect to any type of thermocouple (type K is standard). Because thermocouples can be used over a wide temperature range and thermocouples come in a huge range of probe types, this sensor addresses many harsh industrial applications.  
    Contact Us

    Prices, Quotes, Questions...

    Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?
    Contact Us
  • Put all of your most important sensor data and graphs on one page with the Dashboard option in the Leap software. Dashboards can be configured for you by the Phase IV Engineering team - or select the option to configure your own dashboards.  
    Contact Us

    Prices, Quotes, Questions...

    Need a price or a quote? Have questions? Want to talk to an expert? Need a custom solution?
    Contact Us
    Contact us for pricing on your specific requirements.
  • This Leap wireless transceiver node integrates two standard industrial pressure sensors along with two thermocouples. (Type K is standard, but other types can also be integrated). The sensor is powered by the Leap Sensor device battery with a power supply that can be specified - 12 or 24 volts. No external power source is needed.   Contact us to let us help you make your selected pressure sensors and thermocouples wireless. Part of the breakthrough Leap Sensors® system.   Build your quote here: Contact us for pricing for your unique configuration.
  • Wireless transceiver node designed to integrate with any ring force transducer that has one of these outputs: mV/V, 4-20 mA, or 0-10V.  The Leap transceiver node provides power to the ring force transducer. Ideal for monitoring preloads, testing equipment, clamping forces, and remote ongoing force and load monitoring. Contact us to find the best ring force transducer configuration for your specific application.       Part of the breakthrough Leap Sensors® system.   Build your quote here:
  • Breakthrough technology uses CAN bus to "daisy chain" multiple load cell interface modules to one wireless Leap transceiver node. Anywhere from 2 to 30 load cell modules can be added to the bus. Each load cell module can support 2 full-bridge mV/V load cells, for a total of up to 60 load cells per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring loads and force in several places along structural components such as I-beams, girders, support columns, etc. Contact us to find the best strain sensor configuration for your specific application. Part of the breakthrough Leap Sensors® system. Contact us for pricing on your specific configuration. Build your quote here:
  • Breakthrough technology uses CAN bus to "daisy chain" multiple small strain gauge sensor modules to one wireless Leap transceiver node. Anywhere from 1 to 16 strain gauge modules can be added to the bus. Each CAN strain module can support 2 full-bridge resistive strain gauge sensors, for a total of up to 32 full-bridge strain gauges per transceiver node. Edge processing at the strain sensor level assures a high-quality conversion of the sensor voltage reading to a digital reading, which can then be reliably sent via the CAN bus to the wireless transceiver node. Industrial CAN bus cables can be over 600 feet long. Ideal for wireless monitoring of strain in multiple points along structural components such as I-beams, girders, hanging structures, support columns, railways etc., as well as industrial applications such as rotating shafts in engines, turbines, etc.

    Wireless Strain Demonstration and Tutorial

    wireless strain sensor demonstration and tutorial

    wireless strain sensor demonstration and tutorial

    Contact us to find the best strain sensor configuration for your specific application.     Part of the breakthrough Leap Sensors® system.   Multiple strain sensing modules attach to the transceiver node over a CAN bus. Each module can support two full-bridge strain sensors. The strain modules are ordered separately. Contact Us and an Application Engineer will work with you to provide a detailed final quote that meets your specific application. Build your quote here:
  • Coming Soon!

    The Leap wireless pressure transceiver integrates with any WIKA PGT21 mechanical pressure gauge. The sensor is powered by the Leap Sensor device battery. No external power source is needed. Contact us to let us help you make your selected pressure gauge wireless.   Part of the breakthrough Leap Sensors® system.   Build your quote here: Coming soon!  Contact us for pricing.
  • Ideal for monitoring temperature with a non-contact IR sensor. Standard model measures temperatures from -20C to 1000C with a 20:1 field of view. Contact us if you need an application specific wireless sensor with different specifications.   Part of the breakthrough Leap Sensors® system.   Build your quote here:
Go to Top